The microspheres must have been formed at extremely high temperatures during the World Trade Center’s destruction – temperatures exceeding the melting point of iron (~2,700° F). The spheres must have been molten when they were created in order to take their spherical shape. Such high temperatures could not have been produced by jet fuel or office building fires, which reach only up to 1,800 °F under the most severe fire conditions. However, the thermite reaction produces molten iron and aluminum oxide as the reaction products.
From: Architects & Engineers for 9/11 Truth
Billions of Previously Molten Iron Spheres in WTC Dust, Reveal Use of Thermitic Materials
Iron-rich microspheres were so common in the WTC dust that EPA’s WTC panel discussed their use as one of the signature components to distinguish the WTC dust from so-called “background” dust (i.e. common office-building dust).
RJ Lee Group, evaluating the contamination of the Deutsche Bank building at 130 Liberty Street, alsodescribed these iron-rich spheres, and actually used them as one of their signature markers. In other words, dust wasn’t regarded as WTC dust unless it contained these spheres. The chemical compositionand micro-images of two WTC iron-rich spheres were documented by the US Geological Survey.
The fraction of microspheres in the dust varied (between 0.2 and 1.3 % for USGS outdoor samples and a mean of 5.87% for all RJ Lee samples) depending on the area where the samples were taken. Due to their shape and density, the spheres were not likely to have traveled as far as other components of the dust. The diameter of the spheres in two evaluated dust samples ranged from about one micron (0.001 mm) to 1.5 mm.
The microspheres must have been formed at extremely high temperatures during the World Trade Center’s destruction – temperatures exceeding the melting point of iron (~2,700° F). The spheres must have been molten when they were created in order to take their spherical shape. Such high temperatures could not have been produced by jet fuel or office building fires, which reach only up to 1,800 °F under the most severe fire conditions. However, the thermite reaction produces molten iron and aluminum oxide as the reaction products. After being ejected into the atmosphere, molten iron droplets would be pulled into roughly spherical shapes by surface tension. They would then cool, solidify, and fall out – preserving in their spherical shape the information that they were once molten, and preserving in their chemical signature information about their origin.
Related:
(video!) POWERFUL 9/11 Documentary on Airs on PBS Across Colorado!!!!!!!
(video) Psychologists Explain 911 Denial — Fear, Pride…. “We need the truth in order to heal.”
(video) Nick Rockefeller Predicted “Event” To Trigger War Eleven Months Before 9/11
(video) Molten Steel Found at Ground Zero Weeks After 9/11
(video) 9/11 Masterminds – Explosive Connections
Swedish Structural Engineer: WTC Towers Did Not Collapse from Fire
[10-minute video] 9/11: Explosive Evidence — Don’t be the last to know
A PNAC Primer: How We Got Into This Mess
All of my 9/11 truth posts in reverse chronological order (latest posts appear first, 10 posts per page)
Leave a Reply